Type
| Parameter | Feature | Picture
| | D=280 mm
M=8 mm
W=350 mm |
PC controlled,
geometric deviations gear tester
for measuring profile, helix, pitch
and radial run-out
|  | DO-180 CNC
DO-300 CNC
DO-500 CNC
DO-800 CNC
| D=180 mm
M=10 mm
W=280 mm D=300 mm
M=15 mm
W=250 mm
D=500 mm
M=20 mm
W=380 mm D=800 mm
M=20 mm
W=600 mm |
CNC controlled,
geometric deviations gear tester
for measuring profile, helix, pitch
and radial run-out on gears and
parameters of gear cutters
|  | | D=120 mm
A=35-85 mm |
PC controlled,
Double flank rolling tester
of spur and helical gears
from module 0,1 mm
|  | DO-1 PC | D=320 mm
A=65-250 mm |
PC controlled,
Double flank rolling tester
of spur and helical gears
|  | DO-1 L | D=280 mm
W=700 mm
A=65-260 mm |
Manually operated,
Double flank rolling tester
of spur and helical gears
| | | D=320 mm
A=0-180 mm |
PC controlled,
Double flank rolling tester
of internal gears
|  | | D=400 mm
A=65-375 mm |
PC controlled,
Single flank rolling tester
of spur and helical gears |  | | D=200 mm
P=100 mm |
PC controlled,
Single flank rolling tester
of bevel gears |  | | Dw=110 mm
A=20-310 mm |
PC controlled,
Single flank rolling tester
of worm gearing
|  | KIPL 140 demo video | D=140 mm
P=90 mm |
Manually operated,
Double flank rolling tester
of bevel gears
|  | ZLK 300 PC | D=380 mm
P=250 mm
|
PC controlled,
Single flank rolling tester
of bevel gears
|  | IMO 600 S CNC | Dw=250 mm
A=600 mm
|
CNC controlled,
Single flank rolling tester
of worm gearing
with big diameter
|  | | D=1000 mm
P=600 mm |
CNC controlled,
Single flank rolling tester
of bevel gears
with big diameter |  | KI 200 demo video | D=200 mm
|
Manually operated,
Distance over ball tester
|  |
* special requirement on individual requestD:
| max. diameter of gear | | M: | max. module of gear | | W: | max. width of gear | | Dw: | max. diameter of worm
| A:
| max. distance between axis of worm gearing
| P:
| max. assembly distance of bevel gear
|
|
